propulseur de rétraction hydraulique Side-Power SRHP650 BA45
500kg thrust for 25-46m / 82-151ft boats · Hydraulic retract, BA45 motor, proportional (S-Link) · 110L/min at 274 Bar
Livraison et expédition
- Livraison locale gratuite — Trang · Krabi · Phuket
- Livraison par coursier dans toute la Thaïlande, généralement en 1 à 3 jours.
- Livraison internationale par coursier et fret maritime
Vérification du prix équitable
Notre prix correspond au prix de vente conseillé par le fabricant sur son marché domestique, c'est-à-dire le prix auquel cet équipement est vendu là où il est fabriqué. En Thaïlande, les équipements nautiques de marque sont généralement vendus 15 à 901 TP21T plus cher, lorsque les prix sont affichés. Ce n'est pas le cas des nôtres.
Caractéristiques
| UGS | SRHP650/386TC-BA45 |
|---|---|
| Thrust | 500kg heavy duty · 650kg light duty |
| Suitable boat size | 25-46m / 82-151ft |
| Vessel type | Motor boat, Sail boat |
| Drive | Hydraulic |
| Hydraulic motor | BA45 |
| Flow at 100% thrust | 110L/min |
| Pressure at 100% thrust | 274 Bar |
| Flow / pressure at 60% and 80% | 60%: 85L/min at 164Bar · 80%: 98L/min at 219Bar |
| Ports | A/B 3/4'' 600 PSI SAE J518/ISO6162 Code 62, drain 3/4'' - 16 UNF |
| Tunnel internal diameter | 386 mm |
| Retract depth | 355mm / 13.98in |
| Minimum water depth | 386mm / 15.20in |
| Poids net | 300kg / 661.39lbs |
| Contrôle | Variable speed (PRO proportional), S-Link |
| Propeller | twin counter-rotating |
| Montage | bow or stern |
| Poids | 300 kg |
À propos de ce produit
SRHP650 retract thruster hydraulic BA45 — 500kg heavy duty · 650kg light duty, sized by Sleipner for motor boats and sail boats of 25–46 m (82–151 ft). A hydraulic retractable thruster: it deploys below the hull when needed and retracts into its housing when stowed, so there is no open tunnel and no drag under way. Variable-speed control over S-Link.
What you get, and what to order with it
This is the thruster unit as supplied by Sleipner. It runs from a hydraulic supply — Sleipner rate full thrust at 110L/min and 274 Bar with the BA45 motor. The hydraulic power source, valves and hoses are specified for each vessel, and we design that system with you. You also need the retract housing described in the installation manual and an S-Link control panel (a PJC211 or PJC212 joystick, or a Sleipner touch panel). The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.
Caractéristiques
- Variable-speed (PRO proportional) control — apply only the thrust the manoeuvre needs, quietly and precisely
- S-Link™ CAN-based control with plug-and-play signal cables — works with Sleipner panels, remotes and joystick systems
- Flexible coupling between motor and drive to absorb shock loads
Hydraulic supply
Sleipner’s figures for this motor: 60% thrust at 85L/min / 164Bar; 80% thrust at 98L/min / 219Bar; 100% thrust at 110L/min / 274 Bar. Ports: A/B 3/4'' 600 PSI SAE J518/ISO6162 Code 62, drain 3/4'' - 16 UNF. Send us your pump, PTO or power-pack details and we will confirm the motor choice and system design. Use the thruster size calculator to check SRHP650 against your boat.
Manuals and documents
- Approval in Principle DNV SR Ø386 housing (PDF)
- User manual (PDF)
- Service, Maintenance & Support, Legacy Fault Codes (PDF)
- Installation manual (PDF)
- DNV Type Approval Tunnel thruster (PDF)
Commander
Genuine Sleipner (Side-Power) product, part no. SRHP650/386TC-BA45. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our Returns & Refunds Policy.
Why buy it from Drake Marine
Drake Marine is the official Sleipner (Side-Power) distributor for Thailand, appointed in 2018. We specify, support and warranty what we sell — so the thruster, controls and installation parts can be specified together as one matched system, with genuine spares available when the boat needs them.
Sacrificial anodes for the gear leg, and spares for service — thruster anodes · des pièces de rechange.
Not sure which size your boat needs? Use our thruster size calculator, read Sleipner in Thailand, or email hello@drakemarine.com with your boat's length, displacement and windage.
EN RAPPORTVous pourriez également avoir besoin de
Side-Power SH1000 propulseur de tunnel hydraulique Ø513 BA125
