Side-Power SRHP650 гидравлический убирающийся подруливающий механизм BA45

Об этом продукте

SRHP650 retract thruster hydraulic BA45 — 500kg heavy duty · 650kg light duty, sized by Sleipner for motor boats and sail boats of 25–46 m (82–151 ft). A hydraulic retractable thruster: it deploys below the hull when needed and retracts into its housing when stowed, so there is no open tunnel and no drag under way. Variable-speed control over S-Link.

Что вы получите и что можно заказать в дополнение к этому.

This is the thruster unit as supplied by Sleipner. It runs from a hydraulic supply — Sleipner rate full thrust at 110L/min and 274 Bar with the BA45 motor. The hydraulic power source, valves and hoses are specified for each vessel, and we design that system with you. You also need the retract housing described in the installation manual and an S-Link панель управления (a PJC211 or PJC212 joystick, or a Sleipner touch panel). The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

Функции

• Variable-speed (PRO proportional) control — apply only the thrust the manoeuvre needs, quietly and precisely
• Система управления S-Link™ на основе CAN-шины с подключаемыми кабелями — совместима с панелями, пультами дистанционного управления и джойстиками Sleipner.
• Гибкое соединение между двигателем и приводом для поглощения ударных нагрузок

Hydraulic supply

Sleipner’s figures for this motor: 60% thrust at 85L/min / 164Bar; 80% thrust at 98L/min / 219Bar; 100% thrust at 110L/min / 274 Bar. Ports: A/B 3/4'' 600 PSI SAE J518/ISO6162 Code 62, drain 3/4'' - 16 UNF. Send us your pump, PTO or power-pack details and we will confirm the motor choice and system design. Use the калькулятор размера двигателя to check SRHP650 against your boat.

Руководства и документы

• Approval in Principle DNV SR Ø386 housing (PDF)
• Руководство пользователя (PDF)
• Service, Maintenance & Support, Legacy Fault Codes (PDF)
• Инструкция по установке (PDF)
• DNV Type Approval Tunnel thruster (PDF)

Заказ

Genuine Sleipner (Side-Power) product, part no. SRHP650/386TC-BA45. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our Политика возврата и возмещения средств.