Genuine Dr. Shrink 32′ × 65′ Shrink Wrap. Special order via Drake Marine Thailand.
Our price is the manufacturer's home-market RRP — what this gear sells for where it's made. Branded marine equipment in Thailand typically retails 15–90% above that, when prices are published at all. Ours doesn't.
32' × 65' Shrink Wrap — Blue, 7 mil — genuine Dr. Shrink product, imported by Drake Marine.
Professional-grade marine shrink wrap film from Dr. Shrink — the international shrink wrap supplier trusted by boat yards worldwide. UV-inhibited for outdoor exposure, it shrinks drum-tight for storage, transport and project containment.
| SKU | DS-327065B |
|---|---|
| Colour | Blue |
| Thickness | 7 mil |
| Case / skid quantity | 12/skid |
| Unit weight | 35.38 kg |
Boat storage and monsoon-season protection, transport wrapping, scaffold containment and equipment preservation.
Special order — lead time confirmed before you pay. Wrapping a whole boat? Tell us the hull or email hello@drakemarine.com and we'll spec the film size, tape, strapping and vents in one go.
| Roll width | 32 ft (9.8 m) |
|---|---|
| Roll length | 65 ft (19.8 m) |
| Area per roll | about 193 m² |
| Thickness | 7 mil (178 µ) |
| Colour | Blue |
| Roll weight | 35.38 kg |
| UV protection | UV-inhibited film; lay it shiny side up |
7 mil (180 micron) is the industry standard for boats of roughly 3 to 12 m; for a cover standing through a full monsoon season our guide steps up to 8.5 mil. For long storage in tropical sun our guide recommends white, which reflects heat; choose blue where colour or light under the cover matters more.
What it fits. Width is the dimension that goes over the boat. Run a soft tape from the perimeter band on one side, over the highest and widest point, to the band on the other side, and add 600–900 mm for the hem: this 32 ft (9.8 m) roll covers an over-the-top measurement up to about 8.8 m. The standard sizing chart pairs 32 ft film with beams up to about 3.4 m (11 ft); sailing boats, flybridges and arches push you up a size or two. Between two widths, take the wider roll. Roll length should cover length overall plus about 20%, so 65 ft (19.8 m) is enough for about 16 m of boat in total.
Size it before you order: our shrink wrap calculator turns length, beam and height into film width, mil, tape, strapping and vents. Read how to shrink wrap a boat in the tropics and the Dr. Shrink in Thailand guide.
Send the boat's length, beam, the height you are covering to and a couple of photos on LINE, WhatsApp or hello@drakemarine.com, and we spec the film width, tape, strapping and vent count in one reply.
This roll is a special order: we bring it in for you and confirm the lead time before you pay, and your tape, strapping and vents travel with the film.
This roll weighs about 35.38 kg, so it travels by courier or freight anywhere in Thailand; the delivery cost is shown before you pay. Worldwide by courier or sea freight at cost, quoted before dispatch.
Special-order items are brought in for you, so they are covered for faults, damage and wrong items rather than change of mind. Full details on the returns page.
Free tools from our workshop — two minutes now saves a wrong order later.