Sleipner leaded-line windlass Midi 203, 600W, 12V
Sleipner Midi 203, 600W, 12V anchor windlass for 12 mm leaded anchor line. Typical vessel size under 7.6 m (25 ft), boats up to 3 tons.
- Fit checked by an engineer against your boat and ground tackle before you pay
- Genuine Sleipner (Side-Power), built in Norway
- Special order: usually 7–10 days, confirmed before you pay
- Sleipner warranty; we handle any claim for you in Thailand
- Not sure it fits? LINE @drakeco or WhatsApp +66 99 406 4680
Delivery & shipping
- Free local delivery — Trang · Krabi · Phuket
- Thailand-wide courier, typically 1–3 days
- Worldwide shipping by courier & sea freight
Fair price check
Our price is the manufacturer's home-market RRP — what this gear sells for where it's made. Branded marine equipment in Thailand typically retails 15–90% above that, when prices are published at all. Ours doesn't.
About this product
Sleipner windlass Midi 203, 600W, 12V.
Genuine Sleipner (Side-Power) part. Part no. 36-12109 · Sleipner ref SM172499. Special order from Sleipner — usually 7–10 days, confirmed before payment and typically air-freighted. Worldwide shipping — freight quoted at actual cost, never marked up.
At a glance
| Anchor line | Leaded anchor line (leaded rope): 12 mm leaded anchor line |
|---|---|
| Voltage | 12 V DC |
| Motor | 600 W |
| Typical vessel size (Sleipner) | under 7.6 m (25 ft), boats up to 3 tons |
| Mounting | Internal; the bracket rotates 360° for transom, bulkhead or under-deck mounting |
| Maximum pulling power | 200 kg |
| Recommended anchor weight | 5–15 kg |
| Pull speed | 20 m/min at 30 kg load |
| Recommended fuse | 150 A |
| Operation | Automatic free fall and parking mode; PWM control |
| Size (H × L × W) | 330 × 180 × 150 mm |
| Net weight | 9.8 kg |
| Part number | 36-12109 |
Is it the right size for my boat?
Sleipner gives this 12 V, 600 W windlass a typical vessel size of under 7.6 m (25 ft), boats up to 3 tons. Sleipner's advice is to weigh the boat's size and design, where the windlass will be mounted, and your anchoring conditions and ground tackle. Send us the boat, the anchor weight and the chain or line you carry and we confirm the model before you order. The Sleipner windlass guide compares every model side by side.
What else you need
The windlass is ordered with its circuit breaker, control panel and anchor line; tell us the boat and we list the parts for you:
- Circuit breaker, 150 A (119-00015)
- Battery cable kit, 2 m or the 4 m kit, to suit the run from battery to windlass
- Touch control panel (86-08950) or the round touch panel (86-08955)
- Leaded anchor line, 12 mm, 50 m
- Anchor, swivel and shackles, and an anchor roller if the boat has none
These parts are listed with their prices lower on this page; add them to the same order and they travel together.
Manuals and drawings
The installation and user manuals, cut-out template and CAD file are on Sleipner's page for part 36-12109. Ask us and we send them to you with your quotation.
Questions
12 V or 24 V?
This model is 12 V only.
Chain or leaded line?
This model runs a leaded anchor line, which gives automatic free fall and parking mode. For all-chain rode Sleipner builds the Maxi 32-C.
How long does it take?
It is a special order from Sleipner in Norway: usually 7–10 days, confirmed before you pay and typically air-freighted. The control unit, breaker, panel and line are separate items: add them to the same order and they travel in the same shipment.
Warranty and returns
Sleipner's published warranty is two years for leisure use and one year for commercial use from delivery to the end user, and we handle any claim for you in Thailand. Special-order items are covered for faults, damage and wrong items rather than change of mind; details on the returns page.
RELATEDYou may also need
Side-Power Control panel for windlass, touch (86-08950)
Side-Power Battery cable kit for windlass, 2m
Side-Power Circuit breaker for windlass, 150A Midi
