Description
Specs
Charger Accessories
Designed for charging batteries from PV solar or the engine battery when AC household power is unavailable.
DMT1250
The DMT1250 DC – DC chargers are the smart alternative for leisure or commercial use. They provide the ability to charge batteries from two input sources; either via a PV solar panel(s) when stationary or via from the engine/alternator while driving.
DMT1250 Product Details
Features And Benefits
-
- DC to DC Battery Charger.
- Microprocessor controlled multi-stage charging algorithms (bulk, absorption, float) for gel, flooded and AGM batteries and equalization for flooded batteries.
- MPPT solar regulator allows you to provide maximum power from PV solar panels to the battery.
- Silent mode for quiet operation.
- Mounting brackets and simple design make for effortless installation.
- Compact size for easy storage.
AC12100 Manuals
| Weight | 10 kg |
|---|---|
| Dimensions | 50 × 30 × 20 cm |
| ABSO DC – DC BATTERY CHARGERS DC CONTROLLER OUTPUT: | DMT 1250 |
| OUTPUT CURRENT (MAXIMUM) | 50A |
| CHARGE | 13.5 – 15.5 V |
| FLOAT | 13.0 – 13.8 V for 12V Battery |
| EQUALIZE | 15.5 V |
| CHARGING CONTROL | Five Stages (Test/Bulk/Absorption/Float/Recharge) |
| DC OUTPUT BANK | One |
| SELECTABLE BATTERY TYPE | Gel, AGM, Flooded, Lithium, Program |
| PARASITIC CURRENT | < 10 uA |
| EFFICIENCY | > 90% |
| ENGINE START CONTROL: ON | DC Input from Battery/Alternator |
| ENGINE START CONTROL: OFF | DC Input from PV Input (if available) |
| DC INPUT RANGE | 10.5 – 32 Vdc |
| DC INPUT NOMINAL OPERATION | 17.5Vdc for 12V PV panels connected in parallel |
| MPPT TRACKING EFFICIENCY | >98% (Target) |
| REVERSE BATTERY | Yes (shutdown) |
| DC OUTPUT SHORT CIRCUIT | Yes (shutdown) |
| OVER CHARGE | Yes (shutdown) |
| OVER TEMPERATURE | Yes (de-rated and shutdown) |
| DC FUSE | 2*30A, 32V |
| COOLING | Force Air Ventilation |
| TEMPERATURE SETTING | Hot, Nominal, Cold (no sensor connected) |
| BATTERY TEMPERATURE SENSOR PORT | RJ12 (optional battery temperature sensor use) |
| DIGITAL DISPLAY PORT | RJ12 (optional display panel use) |
| INDICATOR ON UNIT | Flashing Green LED: Charging in process |
| BUILT-IN DISPLAY OR THROUGH RJ12 PORT | LED Display with back lighting |
| WARNING AND FAULT CODE | On unit: Fault LED (red) |
| DC INPUT CONNECTION | Hardwire |
| DC OUTPUT CONNECTION | Hardwire |
| DIMENSIONS | 9.5“ × 6.7” × 2.9” (243.2mm x 170mm x 72.5mm) |
| NET WEIGHT | 4.1 lbs. / 1.85 Kg |
| POWER CONNECTION | Heavy Duty Connector |
| DC-DC REMOTE DISPLAY | DMT RM01 (For viewing unit status, adjusting settings) |
| BATTERY TEMPERATURE SENSOR | BTS 10K (for battery charging voltage adjustment) |
| MARKINGS | cETLus |
| CONFORMANCE | UL & CSA standards |
| EMI/EMC | FCC Part 15 Class B |
| 24 VOLT MODELS ALSO AVAILABLE | SOON |
Reviews