Propulseur d'étambot externe Side-Power SX80 24 V

À propos de ce produit

SX80 external stern thruster 24V — 80kg of thrust (96kg at 24 V), sized by Sleipner for motor boats of 10–15 m (33–49 ft). An external stern thruster that mounts outside the hull — no tunnel to cut — with on/off control from a standard Sleipner panel.

What you get, and what to order with it

This is the thruster unit as supplied by Sleipner. You also need an on/off control panel (8960 single or 8940 dual joystick), an ANL 250 fuse and holder, and battery cable sized to the run. The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

Caractéristiques

• Q-Prop™ five-blade skewed propellers (twin, counter-rotating) — Sleipner measure up to 75% less noise than a conventional propeller
• Intelligent Power Control — minimal delay on direction change to reduce wear, with automatic protection
• Galvanic separation between motor and gear leg to protect against stray-current corrosion
• Overheat protection — the thruster protects itself before the motor can be damaged
• Sealed drive lubrication and ceramic shaft seals — no oil feed to plumb
• External mounting — fits outside the hull at the stern, so no tunnel has to be cut

Power and battery

Draws 280A at 21 V nominal. Sleipner specify a battery of at least 520 CCA (EN) and an ANL 250 fuse. Size the cable with our battery bank and cable size calculator, and use the thruster size calculator to confirm SX80 is the right size for your boat.

Manuals and documents

• Installation manual (PDF)
• Product specification sheet (PDF)
• Product announcement: SX50 Control box modifications (PDF)
• Joystick integration overview for Sleipner thruster systems (PDF)

Commander

Genuine Sleipner (Side-Power) product, part no. SX80/185T-24V. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our Returns & Refunds Policy.