750kg continuous thrust for 30-45m / 98-148ft boats · AC tunnel thruster, 230V AC, proportional (S-Link) · 513 mm tunnel · 53kW / 71.1hp
Notre prix correspond au prix de vente conseillé par le fabricant sur son marché domestique, c'est-à-dire le prix auquel cet équipement est vendu là où il est fabriqué. En Thaïlande, les équipements nautiques de marque sont généralement vendus 15 à 901 TP21T plus cher, lorsque les prix sont affichés. Ce n'est pas le cas des nôtres.
| UGS | SAC900/513-I-2-H |
|---|---|
| Thrust | 750kg continuous (nominal) |
| Suitable boat size | 30-45m / 98-148ft |
| Vessel type | Commercial vessel, Motor boat, Sail boat |
| Alimentation électrique | 230V AC |
| Motor power | 53kW / 71.1hp |
| Tunnel internal diameter | 513 mm |
| Minimum water depth | 700mm / 27.56in |
| Contrôle | Variable speed (proportional), S-Link |
| Propeller | twin counter-rotating, Q-Prop |
| Lubrication | gravity-feed |
| Montage | bow or stern |
SAC900 tunnel thruster Ø513mm 230V — 750kg of continuous thrust, sized by Sleipner for commercial vessels, motor boats and sail boats of 30–45 m (98–148 ft). An AC tunnel thruster running from the vessel’s 230V AC supply. Fits a 513 mm tunnel and can be installed in the bow or stern. Variable-speed control over S-Link.
This is the thruster unit as supplied by Sleipner. AC thrusters run through a motor drive (frequency converter) matched to the model and the vessel’s supply — Sleipner list the drives separately, and we specify the drive, cabling and control with you. You also need a 513 mm tunnel and an S-Link control panel (a PJC211 or PJC212 joystick, or a Sleipner touch panel). The matching items are listed under “You may also need” below, and we will check the whole system against your vessel before it ships.
230V AC, 53kW / 71.1hp motor output. Send us the vessel’s generator and switchboard details and we will confirm the drive and supply arrangement. Use the thruster size calculator to check SAC900 against your vessel.
Genuine Sleipner (Side-Power) product, part no. SAC900/513-I-2-H. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our Returns & Refunds Policy.
Drake Marine is the official Sleipner (Side-Power) distributor for Thailand, appointed in 2018. We specify, support and warranty what we sell — so the thruster, controls and installation parts can be specified together as one matched system, with genuine spares available when the boat needs them.
Sacrificial anodes for the gear leg, and spares for service — thruster anodes · des pièces de rechange.
Not sure which size your boat needs? Use our thruster size calculator, read Sleipner in Thailand, or email hello@drakemarine.com with your boat's length, displacement and windage.
Outils gratuits de notre atelier — deux minutes maintenant vous éviteront une mauvaise commande plus tard.