Expédition mondiale par courrier express et fret maritime — formalités douanières incluses · livraison gratuite en Thaïlande
Propulseurs

Propulseur de tunnel Side-Power SAC450 Ø386mm 230V

$36,201.99 HT
Commande spéciale — délai de livraison confirmé indiqué lors du paiement

450kg continuous thrust for 22-35m / 72-115ft boats · AC tunnel thruster, 230V AC, proportional (S-Link) · 386 mm tunnel · 28kW / 37.5hp

Livraison et expédition

  • Livraison locale gratuite — Trang · Krabi · Phuket
  • Livraison par coursier dans toute la Thaïlande, généralement en 1 à 3 jours.
  • Livraison internationale par coursier et fret maritime

Vérification du prix équitable

Notre prix correspond au prix de vente conseillé par le fabricant sur son marché domestique, c'est-à-dire le prix auquel cet équipement est vendu là où il est fabriqué. En Thaïlande, les équipements nautiques de marque sont généralement vendus 15 à 901 TP21T plus cher, lorsque les prix sont affichés. Ce n'est pas le cas des nôtres.

ÉTAB. 2002 Plus de 20 ans d'expérience maritime Équitable Prix de détail suggéré par le fabricant (PDSF) sur le marché intérieur

Caractéristiques

UGSSAC450/386-C-2-V
Thrust450kg continuous (nominal)
Suitable boat size22-35m / 72-115ft
Vessel typeCommercial vessel, Motor boat, Sail boat
Alimentation électrique230V AC (208-240V 3-phase)
Motor power28kW / 37.5hp
Tunnel internal diameter386 mm
Minimum water depth580mm / 22.83in
Poids net189kg / 416.67lbs
ContrôleVariable speed (proportional), S-Link
Propellertwin counter-rotating, Q-Prop
Lubricationgravity-feed
Montagebow or stern
Poids189 kg

À propos de ce produit

SAC450 tunnel thruster Ø386mm 230V — 450kg of continuous thrust, sized by Sleipner for commercial vessels, motor boats and sail boats of 22–35 m (72–115 ft). An AC tunnel thruster running from the vessel’s 208-240V 3-phase supply. Fits a 386 mm tunnel and can be installed in the bow or stern. Variable-speed control over S-Link.

What you get, and what to order with it

This is the thruster unit as supplied by Sleipner. AC thrusters run through a motor drive (frequency converter) matched to the model and the vessel’s supply — Sleipner list the drives separately, and we specify the drive, cabling and control with you. You also need a 386 mm tunnel and an S-Link control panel (a PJC211 or PJC212 joystick, or a Sleipner touch panel). The matching items are listed under “You may also need” below, and we will check the whole system against your vessel before it ships.

Caractéristiques

  • AC motor rated for continuous thrust — suited to long manoeuvres, dynamic positioning support and commercial duty
  • Variable-speed (proportional) control — apply only the thrust the manoeuvre needs
  • S-Link™ CAN-based control — works with Sleipner panels, remotes and joystick systems
  • Q-Prop™ five-blade skewed propellers (twin, counter-rotating) — Sleipner measure up to 75% less noise than a conventional propeller
  • Gravity-feed gear-leg lubrication for continuous-duty operation
  • Flexible coupling between motor and drive to absorb shock loads
  • Flexible installation — mounts at any angle on the tunnel
  • High-efficiency drive train — Sleipner rate it industry-leading for its class

Alimentation électrique

230V AC, 208-240V 3-phase, 28kW / 37.5hp motor output. Send us the vessel’s generator and switchboard details and we will confirm the drive and supply arrangement. Use the thruster size calculator to check SAC450 against your vessel.

Manuals and documents

Commander

Genuine Sleipner (Side-Power) product, part no. SAC450/386-C-2-V. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our Returns & Refunds Policy.

Why buy it from Drake Marine

Drake Marine is the official Sleipner (Side-Power) distributor for Thailand, appointed in 2018. We specify, support and warranty what we sell — so the thruster, controls and installation parts can be specified together as one matched system, with genuine spares available when the boat needs them.

Sacrificial anodes for the gear leg, and spares for service — thruster anodes · des pièces de rechange.

Not sure which size your boat needs? Use our thruster size calculator, read Sleipner in Thailand, or email hello@drakemarine.com with your boat's length, displacement and windage.

Choisissez la bonne taille avant d'acheter

Outils gratuits de notre atelier — deux minutes maintenant vous éviteront une mauvaise commande plus tard.

FacebookInstagram
DOUBLERDiscutez avec nous en ligne