propulseur de rétraction hydraulique Side-Power SRHP240 G14

À propos de ce produit

SRHP240 retract thruster hydraulic G14 — 220kg heavy duty · 240kg light duty, sized by Sleipner for motor boats and sail boats of 13–23 m (43–75 ft). A hydraulic retractable thruster: it deploys below the hull when needed and retracts into its housing when stowed, so there is no open tunnel and no drag under way. Variable-speed control over S-Link.

What you get, and what to order with it

This is the thruster unit as supplied by Sleipner. It runs from a hydraulic supply — Sleipner rate full thrust at 42.7L/min and 207Bar with the G14 motor. The hydraulic power source, valves and hoses are specified for each vessel, and we design that system with you. You also need the retract housing described in the installation manual and an S-Link control panel (a PJC211 or PJC212 joystick, or a Sleipner touch panel). The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

Caractéristiques

• Variable-speed (PRO proportional) control — apply only the thrust the manoeuvre needs, quietly and precisely
• S-Link™ CAN-based control with plug-and-play signal cables — works with Sleipner panels, remotes and joystick systems
• Q-Prop™ five-blade skewed propellers (twin, counter-rotating) — Sleipner measure up to 75% less noise than a conventional propeller
• Sealed drive lubrication — no oil feed to plumb
• Flexible coupling between motor and drive to absorb shock loads

Hydraulic supply

Sleipner’s figures for this motor: 60% thrust at 33.1L/min / 124Bar; 80% thrust at 38.2L/min / 166Bar; 100% thrust at 42.7L/min / 207Bar. Ports: A/B 18L, Metric DIN 2353, drain 1/4" BSP. Send us your pump, PTO or power-pack details and we will confirm the motor choice and system design. Use the thruster size calculator to check SRHP240 against your boat.

Manuals and documents

• Installation manual (PDF)
• User manual (PDF)
• DNV Type Approval Tunnel thruster (PDF)
• DNV AiP Thruster retract composite housing SR Ø250 and Ø300 (PDF)

Commander

Genuine Sleipner (Side-Power) product, part no. SRHP240-G14-24V. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our Returns & Refunds Policy.