Side-Power SXP80 PRO™ เครื่องขับดันท้ายเรือภายนอก 12V

เกี่ยวกับผลิตภัณฑ์นี้

SXP80 PRO™ external stern thruster 12V — 80kg of thrust (96kg at 12 V), sized by Sleipner for motor boats of 10–15 m (33–49 ft). An external stern thruster that mounts outside the hull — no tunnel to cut — with variable-speed PRO control over S-Link.

What you get, and what to order with it

This is the thruster unit as supplied by Sleipner. You also need an S-Link control panel (a PJC211 or PJC212 joystick, or a Sleipner touch panel), an ANL 400 fuse and holder, and battery cable sized to the run. The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

คุณสมบัติ

• Variable-speed (PRO proportional) control — apply only the thrust the manoeuvre needs, quietly and precisely
• S-Link™ CAN-based control with plug-and-play signal cables — works with Sleipner panels, remotes and joystick systems
• Hold function — keeps a set level of thrust applied, useful when holding the boat against a pontoon
• Q-Prop™ five-blade skewed propellers (twin, counter-rotating) — Sleipner measure up to 75% less noise than a conventional propeller
• Intelligent Power Control — minimal delay on direction change to reduce wear, with automatic protection
• Galvanic separation between motor and gear leg to protect against stray-current corrosion
• Overheat protection — the thruster protects itself before the motor can be damaged
• Sealed drive lubrication and ceramic shaft seals — no oil feed to plumb
• External mounting — fits outside the hull at the stern, so no tunnel has to be cut

Power and battery

Draws 530A at 10.5 V nominal. Sleipner specify a battery of at least 940 CCA (EN) and an ANL 400 fuse. Size the cable with our battery bank and cable size calculator, and use the thruster size calculator to confirm SXP80 is the right size for your boat.

Manuals and documents

• Product specification sheet (PDF)
• Product announcement: SX50 Control box modifications (PDF)
• Joystick integration overview for Sleipner thruster systems (PDF)
• Installation manual (PDF)

การสั่งซื้อ

Genuine Sleipner (Side-Power) product, part no. SXP80/185T-12V. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our นโยบายการคืนสินค้าและคืนเงิน.