Spot Zero Mobile Pro Mini — Portable Water Purifier for Boats to 45 ft (110 V only)

Об этом продукте

110 V only. The Mobile Pro Mini is built for 110–120 V 60 Hz (115 V nominal) supply only — there is no 230 V version. In Thailand it runs from a 230 V → 110 V step-down transformer sized for its 10 A (about 1.2 kW) draw, or from a 110 V inverter or isolation-transformer outlet on board. Need a 230 V 50 Hz unit? Choose the Spot Zero Mobile Pro, which is offered in both voltages.

Он Spot Zero Mobile Pro Mini brings dockside reverse-osmosis purification to boats as small as 20 ft. Plug it into the marina tap and it delivers spot-free rinse water and drinking-quality water from the same hose — no chamois, no bottles. Spot Zero calls it the first mobile water purifier to meet the needs, in price and in size, of boats from 20 to 45 ft.

It uses the same construction as the larger Mobile Pro — a single-piece anodised 6061-T6 aluminium frame, all plumbing internal, marine-grade polyester handles with rubber grips, non-slip non-marking feet and quick-release wheels — in a case 28.5 in (72 cm) long. Two reverse-osmosis membranes do the work; a backlit LCD with capacitive touch controls counts filter and membrane hours. Made in the USA.

Specifications (from the Spot Zero manual)

Service parts

Mobile Pro Mini membranes (4022), pre-filters, O-ring kits, pressure transducer, wheels, carrying rod, rope handles, hose kits and the fitted cover are in our Spot Zero parts section.

Feed-water limits (from the manual)

Service schedule and parts

The LCD counts the hours and tells you when: ORDER FILTER at 90 h, CHANGE FILTER at 100 h, FILTER PAST DUE at 110 h; ORDER MEMBRANE at 490 h, CHANGE MEMBRANE at 500 h.

• Pre-filter FI-FW0021 — every 100 hours; it removes sediment, chlorine, chloramine, VOCs and heavy metals and is never cleaned and reused. Ask us: it is a special-order line we add on request.
• Mobile Pro Mini Membrane, 4022 (MM-FW0014) — two fitted; replace both every 500 hours
• Preventative & Storage Solution (MM-SF0000) — for lay-up longer than a month (Spot Zero P/N 252404263)
• FW Pressure Transducer, 0-250 PSI, CP or PP (MI-PT0002) — the feed-pressure transducer (fault "BAD FP SENSOR")
• Mobile Pro Mini Wheel Assembly (MA-MP0000) — quick-release wheel axle assembly

Storage: if the unit will sit idle for more than a month, Spot Zero's procedure is to circulate the membrane storage chemical mixed in 5 US gallons of the unit's own product water with an auxiliary pump (never the unit's own pump) at no more than 30 psi, then plug the ports; recommissioning is a new pre-filter and a 30-minute flush to waste with the power off. The manual below has the step-by-step.

Manufacturer documents

Spot Zero publishes the drawings and manuals openly; these are the current versions we work from:

• Mobile Pro Mini operation manual (PDF)
• Mobile Pro Mini product sheet (PDF)
• Spot Zero standard limited warranty (July 2026) (PDF)

Гарантия

Spot Zero's standard limited warranty on mobile units is 12 months, parts only, from the date of manufacture or the reseller invoice. Spot Zero's Gold extended warranty adds a further year or 1,000 hours (parts only) and can be bought at any time during the standard term.

How we supply Spot Zero in Thailand

Drake Marine supplies Spot Zero as a factory-direct purchase with our support around it: we size the system to the hull and its tankage, specify the 50 Hz configuration for boats staying in the region, handle the technical questions with Fort Lauderdale, support commissioning on the dock or in the shed, register the warranty, and keep the filters, membranes and service parts on order from Thailand rather than on a ship from Florida each time. Freight is at cost and invoiced separately, so the price you see is the equipment.

Tell us the boat, the tankage and where she will be kept and we will size the system, confirm the 50 Hz configuration for Thailand and quote the equipment with the factory lead time: LINE @drakeco, WhatsApp +66 99 406 4680 или электронная почта.