Sleipner Maxi 40, 1000W, 12V anchor windlass for 14–16 mm leaded anchor line. Typical vessel size under 15.2 m (50 ft).
Наша цена соответствует рекомендованной розничной цене производителя на внутреннем рынке — то есть той цене, по которой это оборудование продается в стране его производства. Фирменное морское оборудование в Таиланде, как правило, продается на 15–90% дороже этой цены, если цены вообще публикуются. У нас это не так.
Лебедка Maxi 40, 1000 Вт, 12 В. Для якорного троса диаметром 14-16 мм.
Genuine Sleipner (Side-Power) part. Part no. 40-12110 · Sleipner ref SM902733. Special order from Sleipner — usually 7–10 days, confirmed before payment and typically air-freighted. Worldwide shipping — freight quoted at actual cost, never marked up.
| Anchor line | Leaded anchor line (leaded rope): 14–16 mm leaded anchor line |
|---|---|
| Напряжение | 12 В постоянного тока |
| Motor | 1,000 W |
| Typical vessel size (Sleipner) | under 15.2 m (50 ft) |
| Монтаж | Internal, on the transom; built into a plastic cover |
| Pulling power (electronically governed) | up to approx. 500 kg |
| Pulling speed | 20–25 m/min with a load of approx. 40 kg |
| Текущий | 10–200 A during normal operation |
| Minimum battery capacity | 12 V / 100 Ah |
| Anchor weight | 10–30 kg |
| Main switch and circuit breaker | 119-00004 (200–250 A) |
| Battery cable (total run) | 25 mm² under 6 m · 35 mm² for 6–16 m · 50 mm² over 16 m |
| Line breaking strain | 16 mm woven lead rope: 4,000 kg · 14 mm: 3,300 kg |
| Operation | Automatic free fall and parking mode; PWM control |
| Size (H × L × W) | 396 × 200 × 300 mm |
| Вес нетто | 20 kg |
| Номер детали | 40-12110 |
Performance, battery and cable figures are from Sleipner's Maxi windlass installation manual and apply to the Maxi range.
Sleipner gives this 12 V, 1,000 W windlass a typical vessel size of under 15.2 m (50 ft). The 24 V, 1,500 W version of the same windlass is rated for boats under 21.3 m (70 ft). Sleipner's advice is to weigh the boat's size and design, where the windlass will be mounted, and your anchoring conditions and ground tackle. Send us the boat, the anchor weight and the chain or line you carry and we confirm the model before you order. The Sleipner windlass guide compares every model side by side.
Sleipner specifies that the windlass is installed with a control box, a circuit breaker and a control panel, plus the hull fitting, anchor line and rode for your boat:
These parts are listed with their prices lower on this page; add them to the same order and they travel together.
The installation and user manuals, cut-out template and CAD file are on Sleipner's page for part 40-12110. Ask us and we send them to you with your quotation.
Match the boat's system voltage. Sleipner builds each Maxi windlass as a 12 V, 1,000 W unit for boats under 15.2 m (50 ft) and a 24 V, 1,500 W unit for boats under 21.3 m (70 ft).
This model runs a leaded anchor line, which gives automatic free fall and parking mode. For all-chain rode Sleipner builds the Maxi 32-C.
It is a special order from Sleipner in Norway: usually 7–10 days, confirmed before you pay and typically air-freighted. The control unit, breaker, panel and line are separate items: add them to the same order and they travel in the same shipment.
Sleipner's published warranty is two years for leisure use and one year for commercial use from delivery to the end user, and we handle any claim for you in Thailand. Special-order items are covered for faults, damage and wrong items rather than change of mind; details on the returns page.
Официальная документация Sleipner (Side-Power) для данного продукта — руководства по установке, руководства пользователя и технические характеристики. Многие из них многоязычные. Открываются в формате PDF из Sleipner.
Не уверены, подойдет ли это к вашей лодке или автомобилю? Напишите нам — мы отвечаем на английском и тайском языках.