Side-Power SH320 туннельный подруливатель гидравлический Ø300 U11

Об этом продукте

SH320 tunnel thruster hydraulic Ø300 U11 — 270kg heavy duty · 320kg light duty, sized by Sleipner for commercial vessels, motor boats and sail boats of 13–23 m (43–75 ft). A hydraulic tunnel thruster, driven from the boat’s hydraulic system rather than a battery bank. Fits a 300 mm tunnel and can be installed in the bow or stern. Variable-speed control over S-Link.

Что вы получите и что можно заказать в дополнение к этому.

This is the thruster unit as supplied by Sleipner. It runs from a hydraulic supply — Sleipner rate full thrust at and with the U11 motor. The hydraulic power source, valves and hoses are specified for each vessel, and we design that system with you. You also need a 300 mm tunnel and an S-Link панель управления (a PJC211 or PJC212 joystick, or a Sleipner touch panel). The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

Функции

• Variable-speed (PRO proportional) control — apply only the thrust the manoeuvre needs, quietly and precisely
• Система управления S-Link™ на основе CAN-шины с подключаемыми кабелями — совместима с панелями, пультами дистанционного управления и джойстиками Sleipner.
• Пятилопастные косоходные винты Q-Prop™ (двойные, вращающиеся в противоположных направлениях) — Sleipner издают до 75% меньше шума, чем обычные винты.
• Galvanic separation between motor and gear leg to protect against stray-current corrosion
• Sealed drive lubrication — no oil feed to plumb
• Гибкое соединение между двигателем и приводом для поглощения ударных нагрузок
• Flexible installation — mounts at any angle on the tunnel

Hydraulic supply

Sleipner’s figures for this motor: 60% thrust at 25.1L/min / 243Bar. Ports: A/B 3/4" BSP, drain 1/4" BSP. Send us your pump, PTO or power-pack details and we will confirm the motor choice and system design. Use the калькулятор размера двигателя to check SH320 against your boat.

Руководства и документы

• Инструкция по установке (PDF)
• Руководство пользователя (PDF)
• Техническая спецификация изделия (PDF)
• Product upgrade information - new ø300mm gear leg (PDF)

Заказ

Genuine Sleipner (Side-Power) product, part no. SH320/300TC-U11. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our Политика возврата и возмещения средств.