Side-Power SH320 туннельный подруливатель гидравлический Ø300 U16

Об этом продукте

SH320 tunnel thruster hydraulic Ø300 U16 — 270kg heavy duty · 320kg light duty, sized by Sleipner for commercial vessels, motor boats and sail boats of 13–23 m (43–75 ft). A hydraulic tunnel thruster, driven from the boat’s hydraulic system rather than a battery bank. Fits a 300 mm tunnel and can be installed in the bow or stern. Variable-speed control over S-Link.

Что вы получите и что можно заказать в дополнение к этому.

This is the thruster unit as supplied by Sleipner. It runs from a hydraulic supply — Sleipner rate full thrust at Maximum achievable thrust is 99% at: 43.7L/min and Maximum achievable thrust is 99% at: 274Bar with the U16 motor. The hydraulic power source, valves and hoses are specified for each vessel, and we design that system with you. You also need a 300 mm tunnel and an S-Link панель управления (a PJC211 or PJC212 joystick, or a Sleipner touch panel). The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

Функции

• Variable-speed (PRO proportional) control — apply only the thrust the manoeuvre needs, quietly and precisely
• Система управления S-Link™ на основе CAN-шины с подключаемыми кабелями — совместима с панелями, пультами дистанционного управления и джойстиками Sleipner.
• Пятилопастные косоходные винты Q-Prop™ (двойные, вращающиеся в противоположных направлениях) — Sleipner издают до 75% меньше шума, чем обычные винты.
• Galvanic separation between motor and gear leg to protect against stray-current corrosion
• Sealed drive lubrication — no oil feed to plumb
• Гибкое соединение между двигателем и приводом для поглощения ударных нагрузок
• Flexible installation — mounts at any angle on the tunnel

Hydraulic supply

Sleipner’s figures for this motor: 60% thrust at 34.6L/min / 171Bar; 80% thrust at 39.9L/min / 229Bar; 100% thrust at Maximum achievable thrust is 99% at: 43.7L/min / Maximum achievable thrust is 99% at: 274Bar. Ports: A/B 3/4" BSP, drain 1/4" BSP. Send us your pump, PTO or power-pack details and we will confirm the motor choice and system design. Use the калькулятор размера двигателя to check SH320 against your boat.

Руководства и документы

• Инструкция по установке (PDF)
• Руководство пользователя (PDF)
• Техническая спецификация изделия (PDF)
• Product upgrade information - new ø300mm gear leg (PDF)

Заказ

Genuine Sleipner (Side-Power) product, part no. SH320/300TC-U16. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our Политика возврата и возмещения средств.