Side-Power SRHP320 гидравлический убирающийся подруливающий механизм G16

Об этом продукте

SRHP320 retract thruster hydraulic G16 — 270kg heavy duty · 320kg light duty, sized by Sleipner for motor boats and sail boats of 22–34 m (72–112 ft). A hydraulic retractable thruster: it deploys below the hull when needed and retracts into its housing when stowed, so there is no open tunnel and no drag under way. Variable-speed control over S-Link.

Что вы получите и что можно заказать в дополнение к этому.

This is the thruster unit as supplied by Sleipner. It runs from a hydraulic supply — Sleipner rate full thrust at 41.3L/min and 253Bar with the G16 motor. The hydraulic power source, valves and hoses are specified for each vessel, and we design that system with you. You also need the retract housing described in the installation manual and an S-Link панель управления (a PJC211 or PJC212 joystick, or a Sleipner touch panel). The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

Функции

• Variable-speed (PRO proportional) control — apply only the thrust the manoeuvre needs, quietly and precisely
• Система управления S-Link™ на основе CAN-шины с подключаемыми кабелями — совместима с панелями, пультами дистанционного управления и джойстиками Sleipner.
• Пятилопастные косоходные винты Q-Prop™ (двойные, вращающиеся в противоположных направлениях) — Sleipner издают до 75% меньше шума, чем обычные винты.
• Galvanic separation between motor and gear leg to protect against stray-current corrosion
• Гибкое соединение между двигателем и приводом для поглощения ударных нагрузок

Hydraulic supply

Sleipner’s figures for this motor: 60% thrust at 32L/min / 152Bar; 80% thrust at 36.9L/min / 202Bar; 100% thrust at 41.3L/min / 253Bar. Ports: A/B 22L, Metric DIN 2353, drain 1/4" BSP. Send us your pump, PTO or power-pack details and we will confirm the motor choice and system design. Use the калькулятор размера двигателя to check SRHP320 against your boat.

Руководства и документы

• Инструкция по установке (PDF)
• Руководство пользователя (PDF)
• DNV Type Approval Tunnel thruster (PDF)
• DNV AiP Thruster retract composite housing SR Ø250 and Ø300 (PDF)

Заказ

Genuine Sleipner (Side-Power) product, part no. SRHP320/300TC-G16. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our Политика возврата и возмещения средств.