Side-Power SE80 туннельное носовое/кормовое подруливающее устройство 12 В

Об этом продукте

SE80 tunnel bow/stern thruster 12V — 80kg of thrust (96kg at 12V), sized by Sleipner for boats of 10-15m (33-49ft). Standard on/off version. Fits a 185 mm tunnel and can be installed in the bow or, with a Sleipner stern tunnel, at the stern.

Что вы получите и что можно заказать в дополнение к этому.

This is the thruster unit: motor, gear leg, twin propellers, motor bracket and electronics. To complete a new installation you also need a 185 mm tunnel (GRP, aluminium or steel to suit the hull), a панель управления, an ANL 400 fuse and holder, and battery cable sized to the run. The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

Функции

• Intelligent Power Control (IPC) — minimal delay on direction change to reduce wear, with solenoid monitoring that stops the thruster automatically if a contact locks in
• Q-Prop™ five-blade skewed propeller — Sleipner measure up to 75% less noise than a conventional propeller
• Galvanic separation between motor and gear leg to protect against stray-current corrosion
• Overheat protection — shuts down (on/off models) or derates (PRO models) before the motor is damaged
• Ceramic shaft seals и sealed drive lubrication — no oil feed to plumb
• Flexible installation — mounts at any angle on the tunnel; the motor can be turned 90° on the bracket

Питание и батарея

Draws 530A at 12 V for a 2–3 minute duty cycle. Sleipner specify a battery of at least 940 CCA (EN) close to the thruster and an ANL 400 fuse. If the thruster battery is more than a few metres from the unit, size the cable with our калькулятор размера аккумуляторной батареи и кабеля, и использовать калькулятор размера двигателя to confirm SE80 is the right size for your boat.

Руководства и документы

• Инструкция по установке (PDF)
• Декларация соответствия ЕС (PDF)
• Control system and joystick compatibility (PDF)
• Руководство пользователя (PDF)
• Troubleshooting guide (IPC thrusters) (PDF)
• User manual (French) (PDF)
• User manual (German) (PDF)

Заказ

Genuine Sleipner (Side-Power) product, part no. SE80/185T-12V. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our Политика возврата и возмещения средств.