Side-Power SE20 туннельное носовое подруливающее устройство 12 В

Об этом продукте

SE20 tunnel bow thruster 12V — 20kg of thrust (25kg at 12V), sized by Sleipner for boats of < 7m (< 23ft). Standard on/off version. Fits a 110 mm tunnel and can be installed in the bow or, with a Sleipner stern tunnel, at the stern.

Что вы получите и что можно заказать в дополнение к этому.

This is the thruster unit: motor, gear leg, single propeller, motor bracket and electronics. To complete a new installation you also need a 110 mm tunnel (GRP, aluminium or steel to suit the hull), a панель управления, an ANL 150 fuse and holder, and battery cable sized to the run. The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

Функции

• Intelligent Power Control (IPC) — minimal delay on direction change to reduce wear, with solenoid monitoring that stops the thruster automatically if a contact locks in
• Q-Prop™ five-blade skewed propeller — Sleipner measure up to 75% less noise than a conventional propeller
• Galvanic separation between motor and gear leg to protect against stray-current corrosion
• Overheat protection — shuts down (on/off models) or derates (PRO models) before the motor is damaged
• Ceramic shaft seals и sealed drive lubrication — no oil feed to plumb
• Flexible installation — mounts at any angle on the tunnel; the motor can be turned 90° on the bracket

Питание и батарея

Draws 150A at 12 V for a 2–3 minute duty cycle. Sleipner specify a battery of at least 330 CCA (EN) close to the thruster and an ANL 150 fuse. If the thruster battery is more than a few metres from the unit, size the cable with our калькулятор размера аккумуляторной батареи и кабеля, и использовать калькулятор размера двигателя to confirm SE20 is the right size for your boat.

Руководства и документы

• Инструкция по установке (PDF)
• Руководство пользователя (PDF)
• Декларация соответствия ЕС (PDF)
• Control system and joystick compatibility (PDF)
• User manual (French) (PDF)
• User manual (German) (PDF)

Заказ

Genuine Sleipner (Side-Power) product, part no. SE20/110S. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our Политика возврата и возмещения средств.