Produkttipps und Rezensionen
Installing DC Air Conditioning on a Boat: The Planning Guide
Placement, the seawater circuit, ducting, condensate, the DC circuit with cable and breaker sizes per model, the house bank and…
Leitfäden
Choosing a Watermaker or Water Purifier for a Boat in Thailand
Watermaker, water purifier or both; how to size one in litres per hour; what warm water, silty harbours and 50…
Leitfäden
Watermaker Parts, Membranes and Service in Thailand: What Wears, When to Change It, How to Order
The parts-counter guide to watermaker ownership in Thailand: pre-filters, membranes, flush cartridges and chemicals, service intervals, how to read a…
Leitfäden
Black Mould and Algae on Decks, Walls and Roofs in Thailand: How to Kill It and Keep It Off
Why everything outdoors in Thailand goes green and black in the wet season, why pressure washing makes it worse, and…
Leitfäden
How to Clean a Teak Deck Without Acid — and Stop Black Mould Coming Back
The no-acid, no-scrub way to clean a teak deck and keep black mould off it in the tropics: what is…
Leitfäden
Sleipner Windlass Guide: Which Model Fits Your Boat
Every Sleipner (Side-Power) anchor windlass side by side: chain or leaded line, mounting, 12 V or 24 V, typical boat…
Leitfäden
Yacht delivery cost: how a delivery is priced, and delivery vs shipping
How professional yacht delivery is priced (daily rate, per mile or fixed fee), the expenses on top, what moves the…
Leitfäden
Lead-acid battery banks in a tropical climate: heat, life and battery-room design in Thailand
A lead-acid battery bank lasts a long time in Thailand when you do five things: charge it with temperature compensation…
Leitfäden
2 V VRLA batteries for telecom towers, exchanges and UPS strings
A telecom or UPS battery string built from 2 V VRLA cells is sized in four steps: fix the cell…
Leitfäden
Charging 2 V AGM cells: float and cycle voltage, temperature compensation and equalisation
Fullriver HGXL 2 V AGM cells float at 2.23–2.25 V per cell and take a cycle (absorption or boost) charge…
Leitfäden
AGM vs OPzV vs OPzS vs gel vs lithium for stationary battery banks
For a stationary bank that spends most of its life on float and is called on for standby or moderate…
Leitfäden
Building a 48 V solar battery bank from 2 V cells: cell count, wiring and sizing
Twenty-four. A 48 V battery bank built from 2 V cells uses 24 cells in series, whatever their capacity: 24…
Leitfäden
Why large solar and standby banks use 2 V cells (2 V vs 12 V blocks)
Large solar and standby banks use 2 V cells because a single 2 V cell is made in almost any…
Leitfäden
How to choose a yacht delivery crew (and why two captain-engineers beat one skipper)
Seven checks before you hire: certificates, watchkeepers, experience, a named person ashore, paperwork, the quote, and the record at the…
Leitfäden
Bringing a yacht to Thailand: check-in, temporary import and what to have ready
Ports of entry, the three offices, the documents to have printed, timing, and what changes when the boat was bought…
Leitfäden
Yacht delivery from Phuket: Langkawi, Singapore and beyond
Routes, timing and formalities for moving a yacht out of Thailand: Langkawi in a day, Singapore down the Malacca Strait,…
Leitfäden
Diesel Bug, Stale Petrol and Lay-Up: Keeping Boat Fuel and Engines Healthy in Thai Heat
Why diesel bug thrives in Thai marinas, how to prevent and treat it, what stale petrol does to an outboard,…
Leitfäden
Which Oil for Your Outboard? TC-W3, FC-W and the Liqui Moly Marine Grades Explained for Thailand
Two-stroke or four-stroke, TC-W3 or FC-W, 10W-30 or 25W-40 — how to read the line in your handbook and match…