จัดส่งฟรีที่ตรัง กระบี ภูเก็ต — จัดส่งฟรีทั่วประเทศเมื่อสั่งซื้อเกิน $250
เครื่องยนต์ไอพ่น

Side-Power SH360 เครื่องขับดันอุโมงค์ไฮดรอลิก Ø300 BA19

$12,318.99 ไม่รวมภาษีมูลค่าเพิ่ม · $13,181.32 รวมภาษีมูลค่าเพิ่ม
คำสั่งซื้อพิเศษ — ยืนยันเวลานำส่งที่ระบุตอนชำระเงิน

360kg thrust for 18-33m / 59-108ft boats · Hydraulic tunnel, BA19 motor, proportional (S-Link) · 300 mm tunnel · 58.5L/min at 293Bar

การจัดส่งและการขนส่ง

  • จัดส่งฟรีในพื้นที่ — ตรัง · กระบี่ · ภูเก็ต
  • บริการจัดส่งทั่วประเทศไทย โดยปกติใช้เวลา 1-3 วัน
  • จัดส่งทั่วโลกโดยบริการจัดส่งด่วนและทางเรือ

ตรวจสอบราคายุติธรรม

ราคาของเราคือราคาขายปลีกแนะนำ (RRP) ของผู้ผลิตในตลาดภายในประเทศ — คือราคาที่อุปกรณ์นี้ถูกขายในประเทศที่ผลิตขึ้น อุปกรณ์ทางทะเลที่มีแบรนด์ในไทยมักมีราคาขายปลีกสูงกว่าราคาดังกล่าว 15–90% เมื่อมีข้อมูลราคาที่เปิดเผยออกมา แต่สินค้าของเราไม่มีข้อมูลราคาดังกล่าว.

ก่อตั้งปี 2002 ประสบการณ์ทางทะเลมากกว่า 20 ปี ยุติธรรม การกำหนดราคาราคาขายปลีกแนะนำ (RRP) ในตลาดในประเทศ

ข้อมูลจำเพาะ

SKUSH360/300TC-BA19
Thrust360kg heavy duty · 360kg light duty
Suitable boat size18-33m / 59-108ft
Vessel typeCommercial vessel, Motor boat, Sail boat
DriveHydraulic
Hydraulic motorBA19
Flow at 100% thrust58.5L/min
Pressure at 100% thrust293Bar
Flow / pressure at 60% and 80%60%: 45.3L/min at 176Bar · 80%: 52.3L/min at 234Bar
PortsA/B 3/4" BSP, drain 3/8" BSP*
Tunnel internal diameter300 มม.
Minimum water depth450mm / 17.72in
น้ำหนักสุทธิ26kg / 57.32lbs
ควบคุมVariable speed (PRO proportional), S-Link
Propellertwin counter-rotating, Q-Prop
การติดตั้งbow or stern
น้ำหนัก26 กก.

เกี่ยวกับผลิตภัณฑ์นี้

SH360 tunnel thruster hydraulic Ø300 BA19 — 360kg heavy duty · 360kg light duty, sized by Sleipner for commercial vessels, motor boats and sail boats of 18–33 m (59–108 ft). A hydraulic tunnel thruster, driven from the boat’s hydraulic system rather than a battery bank. Fits a 300 mm tunnel and can be installed in the bow or stern. Variable-speed control over S-Link.

What you get, and what to order with it

This is the thruster unit as supplied by Sleipner. It runs from a hydraulic supply — Sleipner rate full thrust at 58.5L/min and 293Bar with the BA19 motor. The hydraulic power source, valves and hoses are specified for each vessel, and we design that system with you. You also need a 300 mm tunnel and an S-Link control panel (a PJC211 or PJC212 joystick, or a Sleipner touch panel). The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

คุณสมบัติ

  • Variable-speed (PRO proportional) control — apply only the thrust the manoeuvre needs, quietly and precisely
  • S-Link™ CAN-based control with plug-and-play signal cables — works with Sleipner panels, remotes and joystick systems
  • Q-Prop™ five-blade skewed propellers (twin, counter-rotating) — Sleipner measure up to 75% less noise than a conventional propeller
  • Flexible coupling between motor and drive to absorb shock loads
  • Flexible installation — mounts at any angle on the tunnel

Hydraulic supply

Sleipner’s figures for this motor: 60% thrust at 45.3L/min / 176Bar; 80% thrust at 52.3L/min / 234Bar; 100% thrust at 58.5L/min / 293Bar. Ports: A/B 3/4" BSP, drain 3/8" BSP*. Send us your pump, PTO or power-pack details and we will confirm the motor choice and system design. Use the thruster size calculator to check SH360 against your boat.

Manuals and documents

การสั่งซื้อ

Genuine Sleipner (Side-Power) product, part no. SH360/300TC-BA19. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our นโยบายการคืนสินค้าและคืนเงิน.

Why buy it from Drake Marine

Drake Marine is the official Sleipner (Side-Power) distributor for Thailand, appointed in 2018. We specify, support and warranty what we sell — so the thruster, controls and installation parts can be specified together as one matched system, with genuine spares available when the boat needs them.

Sacrificial anodes for the gear leg, and spares for service — thruster anodes · อะไหล่.

Not sure which size your boat needs? Use our thruster size calculator, read Sleipner in Thailand, or email hello@drakemarine.com with your boat's length, displacement and windage.

ตรวจสอบขนาดให้แน่ใจก่อนซื้อ

เครื่องมือฟรีจากโรงงานของเรา — ใช้เวลาเพียงสองนาทีในตอนนี้ ช่วยป้องกันการสั่งซื้อผิดพลาดในภายหลัง.

เฟซบุ๊กอินสตาแกรม
เส้นแชทกับเราทางไลน์