Side-Power SE300 เครื่องขับดันหัวเรือ/ท้ายเรือแบบอุโมงค์ 48V

เกี่ยวกับผลิตภัณฑ์นี้

SE300 tunnel bow/stern thruster 48V — 300kg of thrust (340kg at 48V), sized by Sleipner for boats of 22-30m (72-98ft). Standard on/off version. Fits a 300 mm tunnel and can be installed in the bow or, with a Sleipner stern tunnel, at the stern.

What you get, and what to order with it

This is the thruster unit: motor, gear leg, propeller, motor bracket and electronics. To complete a new installation you also need a 300 mm tunnel (GRP, aluminium or steel to suit the hull), a control panel, an ANL 325 fuse and holder, and battery cable sized to the run. The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

คุณสมบัติ

• Intelligent Power Control (IPC) — minimal delay on direction change to reduce wear, with solenoid monitoring that stops the thruster automatically if a contact locks in
• Q-Prop™ five-blade skewed propeller — Sleipner measure up to 75% less noise than a conventional propeller
• Galvanic separation between motor and gear leg to protect against stray-current corrosion
• Overheat protection — shuts down (on/off models) or derates (PRO models) before the motor is damaged
• Flexible installation — mounts at any angle on the tunnel; the motor can be turned 90° on the bracket

Power and battery

Draws 400-450A at 48 V for a 2–3 minute duty cycle. Sleipner specify a battery of at least 680 CCA (EN) close to the thruster and an ANL 325 fuse. If the thruster battery is more than a few metres from the unit, size the cable with our battery bank and cable size calculator, and use the thruster size calculator to confirm SE300 is the right size for your boat.

Manuals and documents

• EU Declaration of Conformity (PDF)
• Control system and joystick compatibility (PDF)
• Installation manual (PDF)
• User manual (PDF)
• User manual (French) (PDF)
• User manual (German) (PDF)

การสั่งซื้อ

Genuine Sleipner (Side-Power) product, part no. SE300/300TC. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our นโยบายการคืนสินค้าและคืนเงิน.