ฟิล์มยืดหดคุณภาพสูง Dr. Shrink ขนาด 28 x 250 ฟุต — สีขาว ความหนา 7 มิล (178 ไมครอน)

At a glance

Which film do I need?

7 mil (180 micron) is the industry standard for boats of roughly 3 to 12 m; for a cover standing through a full monsoon season our guide steps up to 8.5 mil. White is the colour our guide recommends for the tropics: it reflects heat and keeps the boat cooler under the cover.

What it fits. Width is the dimension that goes over the boat. Run a soft tape from the perimeter band on one side, over the highest and widest point, to the band on the other side, and add 600–900 mm for the hem: this 28 ft (8.5 m) roll covers an over-the-top measurement up to about 7.6 m. Flybridges, arches and sailing rigs push you up a size or two. Between two widths, take the wider roll. Roll length should cover length overall plus about 20%, so 250 ft (76.2 m) is enough for about 63 m of boat in total.

Size it before you order: our เครื่องคำนวณฟิล์มหด turns length, beam and height into film width, mil, tape, strapping and vents. Read how to shrink wrap a boat in the tropics และ Dr. Shrink in Thailand guide.

What else you need

• Preservation tape to seal seams, vents and doors
• Woven strapping and buckles for the belt and support lines
• Vents so moisture escapes under the cover, and a zipper door if you need to get aboard
• A heat tool; doing one boat? The ชุดห่อฟิล์มหดแบบครบชุด may cover you in one box

คำถาม

How do I get the whole materials list right?

Send the boat's length, beam, the height you are covering to and a couple of photos on เส้น, วาส or hello@drakemarine.com, and we spec the film width, tape, strapping and vent count in one reply.

Is it in stock?

Yes, in stock in Thailand and checked before dispatch.

จัดส่ง

Delivered anywhere in Thailand by courier or freight; the cost is shown before you pay. Worldwide by courier or sea freight at cost, quoted before dispatch.

Returns

Unused rolls in original packaging can be returned within 30 days. Full details on the returns page.