Sleipner Maxi 34-G, 1500W, 24V, starboard anchor windlass for 14–16 mm leaded anchor line. Typical vessel size under 21.3 m (70 ft).
Unser Preis entspricht der unverbindlichen Preisempfehlung des Herstellers für den Heimatmarkt – dem Preis, zu dem diese Ausrüstung dort verkauft wird, wo sie hergestellt wird. Marken-Marineausrüstung wird in Thailand üblicherweise 15–90% teurer verkauft, sofern die Preise überhaupt veröffentlicht werden. Bei uns ist das nicht der Fall.
Maxi 34-G Ankerwinde, 1500W, 24V, Steuerbord. Für 14-16mm Bleiankerleine.
Genuine Sleipner (Side-Power) part. Part no. 34-4G-24115 · Sleipner ref SM902704. Special order from Sleipner — usually 7–10 days, confirmed before payment and typically air-freighted. Worldwide shipping — freight quoted at actual cost, never marked up.
| Anchor line | Leaded anchor line (leaded rope): 14–16 mm leaded anchor line |
|---|---|
| Stromspannung | 24 V DC |
| Motor | 1,500 W |
| Typical vessel size (Sleipner) | under 21.3 m (70 ft) |
| Montage | External side mounting for boats with a built-in bathing platform or extension; starboard-side version, with the motor inside the boat |
| Pulling power (electronically governed) | up to approx. 650 kg |
| Pulling speed | 20–25 m/min with a load of approx. 40 kg |
| Aktuell | 10–200 A during normal operation |
| Minimum battery capacity | 24 V / 75 Ah |
| Anchor weight | 10–30 kg |
| Main switch and circuit breaker | 119-00004 (200–250 A) |
| Battery cable (total run) | 25 mm² under 6 m · 35 mm² for 6–16 m · 50 mm² over 16 m |
| Line breaking strain | 16 mm woven lead rope: 4,000 kg · 14 mm: 3,300 kg |
| Operation | Automatic free fall and parking mode; PWM control |
| Size (H × L × W) | 370 × 283 × 255 mm |
| Nettogewicht | 20 kg |
| Teilenummer | 34-4G-24115 |
Performance, battery and cable figures are from Sleipner's Maxi windlass installation manual and apply to the Maxi range.
Sleipner gives this 24 V, 1,500 W windlass a typical vessel size of under 21.3 m (70 ft). The 12 V, 1,000 W version of the same windlass is rated for boats under 15.2 m (50 ft). Sleipner's advice is to weigh the boat's size and design, where the windlass will be mounted, and your anchoring conditions and ground tackle. Send us the boat, the anchor weight and the chain or line you carry and we confirm the model before you order. The Sleipner windlass guide compares every model side by side.
Sleipner specifies that the windlass is installed with a control box, a circuit breaker and a control panel, plus the hull fitting, anchor line and rode for your boat:
These parts are listed with their prices lower on this page; add them to the same order and they travel together.
The installation and user manuals, cut-out template and CAD file are on Sleipner's page for part 34-4G-24115. Ask us and we send them to you with your quotation.
Match the boat's system voltage. Sleipner builds each Maxi windlass as a 12 V, 1,000 W unit for boats under 15.2 m (50 ft) and a 24 V, 1,500 W unit for boats under 21.3 m (70 ft).
This model runs a leaded anchor line, which gives automatic free fall and parking mode. For all-chain rode Sleipner builds the Maxi 32-C.
It is a special order from Sleipner in Norway: usually 7–10 days, confirmed before you pay and typically air-freighted. The control unit, breaker, panel and line are separate items: add them to the same order and they travel in the same shipment.
Sleipner's published warranty is two years for leisure use and one year for commercial use from delivery to the end user, and we handle any claim for you in Thailand. Special-order items are covered for faults, damage and wrong items rather than change of mind; details on the returns page.