Original Dr. Shrink Schrumpffolie 12′ × 149′. Sonderbestellung über Drake Marine Thailand.
Unser Preis entspricht der unverbindlichen Preisempfehlung des Herstellers für den Heimatmarkt – dem Preis, zu dem diese Ausrüstung dort verkauft wird, wo sie hergestellt wird. Marken-Marineausrüstung wird in Thailand üblicherweise 15–90% teurer verkauft, sofern die Preise überhaupt veröffentlicht werden. Bei uns ist das nicht der Fall.
12' × 149' Schrumpffolie – Blau, 7 mil — Originalprodukt von Dr. Shrink, importiert von Drake Marine.
Professional-grade marine shrink wrap film from Dr. Shrink — the international shrink wrap supplier trusted by boat yards worldwide. UV-inhibited for outdoor exposure, it shrinks drum-tight for storage, transport and project containment.
| Artikelnummer | DS-127149B |
|---|---|
| Farbe | Blau |
| Dicke | 7 Millionen |
| Karton-/Palettenmenge | 20/Palette |
| Stückgewicht | 29,03 kg |
Bootslagerung und Schutz während der Monsunzeit, Transportverpackung, Gerüstsicherung und Geräteerhaltung.
Special order — lead time confirmed before you pay. Wrapping a whole boat? Sagen Sie uns den Rumpf Oder senden Sie eine E-Mail an hello@drakemarine.com, und wir spezifizieren die Foliengröße, das Klebeband, die Umreifungsbänder und die Belüftungsöffnungen auf einmal.
| Roll width | 12 ft (3.7 m) |
|---|---|
| Roll length | 149 ft (45.4 m) |
| Area per roll | about 166 m² |
| Dicke | 7 mil (178 µ) |
| Farbe | Blau |
| Roll weight | 29,03 kg |
| UV protection | UV-inhibited film; lay it shiny side up |
7 mil (180 micron) is the industry standard for boats of roughly 3 to 12 m; for a cover standing through a full monsoon season our guide steps up to 8.5 mil. For long storage in tropical sun our guide recommends white, which reflects heat; choose blue where colour or light under the cover matters more.
What it fits. Width is the dimension that goes over the boat. Run a soft tape from the perimeter band on one side, over the highest and widest point, to the band on the other side, and add 600–900 mm for the hem: this 12 ft (3.7 m) roll covers an over-the-top measurement up to about 2.7 m. The standard sizing chart pairs 12 ft film with beams up to about 2.1 m (7 ft); sailing boats, flybridges and arches push you up a size or two. Between two widths, take the wider roll. Roll length should cover length overall plus about 20%, so 149 ft (45.4 m) is enough for about 37 m of boat in total.
Size it before you order: our Schrumpffolienrechner turns length, beam and height into film width, mil, tape, strapping and vents. Read how to shrink wrap a boat in the tropics und die Dr. Shrink in Thailand guide.
Send the boat's length, beam, the height you are covering to and a couple of photos on LINIE, WhatsApp or hello@drakemarine.com, and we spec the film width, tape, strapping and vent count in one reply.
This roll is a special order: we bring it in for you and confirm the lead time before you pay, and your tape, strapping and vents travel with the film.
This roll weighs about 29.03 kg, so it travels by courier or freight anywhere in Thailand; the delivery cost is shown before you pay. Worldwide by courier or sea freight at cost, quoted before dispatch.
Special-order items are brought in for you, so they are covered for faults, damage and wrong items rather than change of mind. Full details on the returns page.
Kostenlose Werkzeuge aus unserer Werkstatt – zwei Minuten jetzt ersparen Ihnen später eine Fehlbestellung.