Side-Power SH2200 เครื่องขับดันอุโมงค์ไฮดรอลิก Ø730 มม. BA250 (SH2200/730-BA250-H)

เกี่ยวกับผลิตภัณฑ์นี้

SH2200 tunnel thruster hydraulic Ø730mm BA250 — 2200kg heavy duty · 2200kg light duty, sized by Sleipner for motor boats, commercial vessels and sail boats of 50–70 m (164–230 ft). A hydraulic tunnel thruster, driven from the boat’s hydraulic system rather than a battery bank. Fits a 730 mm tunnel and can be installed in the bow or stern. Variable-speed control over S-Link.

What you get, and what to order with it

This is the thruster unit as supplied by Sleipner. It runs from a hydraulic supply — Sleipner rate full thrust at 288L/min and 302Bar with the BA250 motor. The hydraulic power source, valves and hoses are specified for each vessel, and we design that system with you. You also need a 730 mm tunnel and an S-Link control panel (a PJC211 or PJC212 joystick, or a Sleipner touch panel). The matching items are listed under “You may also need” below, and we will check the whole kit against your boat before it ships.

คุณสมบัติ

• Variable-speed (PRO proportional) control — apply only the thrust the manoeuvre needs, quietly and precisely
• S-Link™ CAN-based control with plug-and-play signal cables — works with Sleipner panels, remotes and joystick systems
• Q-Prop™ five-blade skewed propellers (twin, counter-rotating) — Sleipner measure up to 75% less noise than a conventional propeller
• Overheat protection — the thruster protects itself before the motor can be damaged
• Flexible coupling between motor and drive to absorb shock loads

Hydraulic supply

Sleipner’s figures for this motor: 60% thrust at 223L/min / 181Bar; 80% thrust at 257L/min / 241Bar; 100% thrust at 288L/min / 302Bar. Ports: A/B 1.1/2" 6000 PSI SAE-J518/ISO6162 Code 62, drain 3/4" BSP. Send us your pump, PTO or power-pack details and we will confirm the motor choice and system design. Use the thruster size calculator to check SH2200 against your boat.

Manuals and documents

• Installation manual (PDF)
• DNV Type Approval Tunnel thruster (PDF)

การสั่งซื้อ

Genuine Sleipner (Side-Power) product, part no. SH2200/730-BA250-H. Special order from Sleipner — the lead time is usually 7–10 days, confirmed before payment, and units are typically air-freighted. Worldwide shipping with freight quoted at actual cost, never marked up. Sleipner’s manufacturer warranty applies (terms in the user manual); as a special-order item it is returnable only if faulty — see our นโยบายการคืนสินค้าและคืนเงิน.