Automatic low-voltage disconnect that keeps enough charge in the bank to start the engine. Preset voltage and time thresholds, dash-mounted reset switch, IP66 125 A continuous contactor. 12 V and 24 V kits, OEM CPU-only version and spare contactors.
Our price is the manufacturer's home-market RRP — what this gear sells for where it's made. Branded marine equipment in Thailand typically retails 15–90% above that, when prices are published at all. Ours doesn't.
PowerGuard Lite is the simplest way to make sure a battery never gets drained to the point where the engine will not start. The control unit watches battery voltage; when it has stayed below the preset level for the preset time, the contactor opens and disconnects the loads, keeping a reserve for engine starting. A dash-mounted press switch reconnects everything once you are ready. It is the entry point to Merlin's flat battery protection range and is fitted to thousands of workboats, patrol craft, ambulances and utility vehicles.
The kit comprises an IP66 contactor rated 125 A continuous (mounted next to the battery), a compact CPU with trim-pot adjustment for the disconnect voltage and delay (mounted inside the cabin or console), and the dash reset switch. An OEM version supplies the CPU alone for builders who integrate their own contactor and switchgear.
Any boat or vehicle where a flat start battery is a safety or downtime problem: single-engine fishing boats and RIBs, dive boats, patrol and rescue craft, ambulances, service vans and expedition 4×4s. For two banks, programmable thresholds or remote battery switching, step up to PowerGuard PRO.
| System voltage | 12 V (19-4015) or 24 V (19-4016); OEM CPU auto-ranging 12/24 V |
|---|---|
| Contactor rating | 125 A continuous, IP66 |
| Adjustment | Trim-pot: disconnect voltage and delay time |
| Reset | Dash-mounted press switch (supplied) |
| Manufacturer | Merlin Power Ltd, UK — ISO 9001 / ISO 14001 |
| Version | Merlin part no. | Price (USD) |
|---|---|---|
| 12 V complete kit | 19-4015 | $345.99 |
| 24 V complete kit | 19-4016 | $345.99 |
| 12/24 V OEM — CPU only | 19-4017 | $250.99 |
| Spare contactor 12 V, 125 A | 19-4018 | $94.99 |
| Spare contactor 24 V, 125 A | 19-4019 | $94.99 |
Worldwide delivery. Price shown is for the goods; freight to your door anywhere in the world is quoted at cost and invoiced separately. Merlin products are built in the UK — stock items typically dispatch within 1–3 working days, built-to-order kits within 30 days. Thailand customers: we consolidate into our regular air-freight consignments to Trang, Phuket and Bangkok. Not sure which version you need? Email hello@drakemarine.com or WhatsApp +66 99 406 4680 with your battery and charging layout and we will spec it for you.
Merlin Power has designed and built battery management electronics in the UK for more than 20 years, with the same technology fitted to lifeboats, emergency-service fleets and NATO armoured vehicles. We supply the full Merlin range with system design support: tell us your alternator, battery chemistry and loads and we will specify the right controller, contactors and cabling, and pair it with matching batteries, charging and renewable inputs where it makes sense. Every unit carries Merlin's manufacturer warranty and is supported by Merlin's UK technical team.
Datasheets, installation manuals, programming guides and the free PC configuration software for programmable units are published on Merlin Power's manuals page and software page. We can also send the relevant PDF with your quote.
Free tools from our workshop — two minutes now saves a wrong order later.